Fadal (1)
Mazak (1)
Mori Seiki (1)
Okuma (1)
Sumitomo (1)
Mazak (4)
Mori Seiki (9)
Dainichi (1)
Kitamura (1)
Mazak (1)
Toyoda (1)
Doosan (1)
Lasers (1)
Rotary Tables - Indexers (1)
Extruders (1)
Plastic Injection Molding (17)
Plastic Injection Molding Electric (2)
CNC Boring Mills (1)
EDM Wire (1)



Re-Sort Results By: Year  |  Make  |  Model  |  Price  |  Ton  |  Shot Size

 
120MJ-10C120MJ-10C
1994 Mitsubishi 120MJ-10C

 16.14" x 16.14" Tie Bar Spacing, 24.02" x 24.02" Platen, 27.95" Max Daylight, 3.1" Ejector Stroke, Mac VI Control, HKO

$4,500.00
Ref No: 7795798
Tonnage: 120.0
Shot Size: 9.7
 
226-4226-4
2007 RDN 226-4

 Profile Puller, "0" hours, 26" x 4" Belt Size, .50 Horsepower, Closed Loop Speed Regulation, 208v

$11,500.00
Ref No: 7798362
 
90H90H
1998 Toyo 90H

14.17" x 14.17" Tie Bar Clearance, 21.26" x 20.08" Die Plate Size, 90 Ton Clamping Force, 12.60" Clamping Stroke, Min/Max Mold Height 5.91"/13.78", 4.5 Tons Ejector Force, 3.15" Ejector Stroke, 460 V, PLCS 9 Control, HKO, CP    

 
 
$8,500.00
Ref No: 7786328
Tonnage: 90.0
Shot Size: 5.5
 
90H90H
1998 Toyo 90H

Tie Bar Clearance 14.17" x 14.17", Die Plate Size 21.26" x 20.08", Clamping Force 90 Ton, Clamping Stroke 12.60", Min Mold Height 5.91", Max Mold Height 13.78", Ejector Force 4.5 Tons, Ejector Stroke 3.15", Dimension 153.7" x 43.2" x 72.6", Electrics 460 V, Equipped With PLCS 9 Control, HKO, CP    

$8,500.00
Ref No: 7783226
Tonnage: 90.0
Shot Size: 5.5
 
Cadet Mate V4020Cadet Mate V4020
1998 Okuma Cadet Mate V4020

 40" x 20" x 20" Travels, 20 ATC, 8,000 RPM, Cat 40 Taper, 15 HP, OSP 700M Control, ATS RT-160 4th Axis, High Pressure Coolant, Rigid Tap

$26,500.00
Ref No: 7793873
 
CL-153CL-153
2001 Mori Seiki CL-153

1.2" Bar Cap, 20.3" Swing, 16.1" Max Turning Diameter, 6000 RPM, MSG-803 MAPPS Control

$33,000.00
Ref No: 7798299
 
CNC-401CNC-401
2010 Nikken CNC-401

 Nikken CNC-401 Rotary Table with Nikken TAT-400 Support Table

$24,995.00
Ref No: 7763137
 
DBC 130 IIDBC 130 II
2013 Doosan DBC 130 II

63 x 70.8" Table Size, 118.1" x 78.7" x 63.0" Travels, 40 ATC, 2,500 RPM, CAT 50 Taper, Fanuc 31i-A CNC Control (5 Axis Control). Chip Conveyor

$417,000.00
Ref No: 7798263
 
DLG50DLG50
1968 Dainichi DLG50

 21" x 54" Swing Over Bed, 21" Swing Over Cross Slide, 12" Swing Over Gap, 32" Distance Between Centers, A-1-8 Spindle Nose, 2-1/16" Hole, 20-1000 RPM, Threads Inch 2" to 112 MM 0.1 to 112, MT5 Taper, 6" Travel, 1/16" Graduation, 220/400 Phase 3, 10 Cycle 60 Horse Power, Tailstock

 
 
$6,750.00
Ref No: 7786174
 
DuraTurn 2050DuraTurn 2050
2013 Mori Seiki DuraTurn 2050

8" Chuck, 2.5" Bar Cap, 21.7" Swing, 13.3" Max Turning Diameter, 4000 RPM, Fanuc Oi-TD Control, 12 Stations, LNS Chip Conveyor, Tailstock

 
$59,500.00
Ref No: 7798298
 
Electric ES 7000-100AElectric ES 7000-100A
1999 Nissei Electric ES 7000-100A

28.94"  x 28.94" Tie Bar Spacing, 41.5" x 41.5" Platen Size, 13.78"/26.38" Min/Max Mold Thickness, 51.97" Max Daylight, NC9300T Control

 
$8,950.00
Ref No: 7796676
Tonnage: 400.0
Shot Size: 34
 
ES5000-50EES5000-50E
2003 Nissei ES5000-50E

Platen 33.5" x 33.5", Tie Bar Spacing 23.2" x 23.2", Min / Max mold Thickness 11" / 21.7", Clamp Stroke 20.9", Ejector Stroke 4.7", Equipped with: NC9300T Control, SPI Robot Interface, Wired for CP, Approx. 30,047 Hours   

Call For Price
Ref No: 7783524
Tonnage: 250.0
Shot Size: 16
 
FA-450IIIFA-450III
2001 Toyoda FA-450III

17.72" x 17.72" Pallets, 23.6" x 23.6" x 23.6" Travels, 120 Side Arm ATC, 14,000 RPM, BT40 Taper, Fanuc 16iM Control, Chip Conveyor, 1 Degree, Spindle Chiller, 25 Horsepower, 1000 PSI High Pressure Coolant Thru Spindle

$29,500.00
Ref No: 7793672
 
FH-4800FH-4800
1998/2002 Mazak FH-4800

15.75" x 15.75" Pallets, 22.05" x 24.02" x 23.62" Travels, 120/80 ATC, 25,000 RPM, Cat 40 Taper, 30 HP, 220/3ph Power Requirement, Mazatrol Fusion Control, 1 Degree Indexing, Chip Conveyor, Through Spindle Flood Coolant,14 Pallet FMS Cell System, Price For Both Machines

 
$100,000.00
Ref No: 7796119
 
FN360-100AFN360-100A
2006 Nissei FN360-100A

41.53" x 41.53" Platen, 28.93" x 28.93" Distance Between Tie Bars, 10"  Screw Stroke, 38.19" Clamp Stroke, 13.78" Min Mold Thickness, 51.97" Max Daylight, 5.91" Ejector Stroke, Tact Control, HKO, CP

 
Call For Price
Ref No: 7798270
Tonnage: 400.0
Shot Size: 34
 
FN7000-140AFN7000-140A
1998 Nissei FN7000-140A

 41.53" x 41.53" Platen, 28.93" x 28.93" Distance Between Tie Bars, 10" Screw Stroke, 38.19" Clamp Stroke , 13.78" Min/Mold Thickness, 51.97" Max Daylight, 5.91" Ejector Stroke, NC9300F Control, CP

 
$13,900.00
Ref No: 7796675
Tonnage: 400.0
Shot Size: 40
 
FV9100-310LFV9100-310L
2002 Nissei FV9100-310L

 43.3" x 43.3" Distance Between Tie Bars, 60.6" x 60.6" Platen Size, 37.4" Clamp Stroke, 17.7/75.2" Min/Max Daylight, NC9300T Control, HKO, CP, RI, Under Power

 
$89,500.00
Ref No: 7796901
Tonnage: 720.0
Shot Size: 107
 
FX10KFX10K
2000 Mitsubishi FX10K
14" x 10" x 9" Travels, 1.25" x 1.25" U/V Travels, 31.4" x 31.4" Inside Tank Dimensions, 15 degree @ 4.0" Taper Cutting, M700 64 Bit Control, Glass Scale Feedback, Auto Wire Threading, Wire Chopper, (2) Machines Available
 
$24,990.00
Ref No: 8039227
 
H400H400
1997 Kitamura H400

 15.75" x 15.75" Pallets, 24" x 20" x 20" Travels, 100 ATC, 10,000 RPM, BT40 Taper, 20 HP, 208/3/60 Power Requirment, Fanuc 15-M Control, Full 4th Indexing, Chip Conveyor, Thru Spindle Coolant

$32,990.00
Ref No: 7794127
 
Integrex i-200SIntegrex i-200S
2014 Mazak Integrex i-200S

8" Chuck, 2.56" Bar Capacity, 25.91" Swing, 5,000 RPM, Mazatrol Smooth Control, ATLM, Tailstock, 5 Axis Machining Package for Smoothx, 36 ATC Capto, Coolant Thru Milling Head, LNS Turbo Micro Hinge 250 Chip Conveyor

$275,000.00
Ref No: 8039156
 
Integrex-200SYIntegrex-200SY
2001 Mazak Integrex-200SY

 6" 3 Jaw SMW Quick Jaw Change Chuck (Sub Spindle), 8" 3-JAw SMW Quick Jaw Change Chuck (Main), 2.56" Bar Capacity, 20.87" Swing, 5000 RPM, Fusion 640MT CNC Control W/10.4" Color Monitor

 
$59,900.00
Ref No: 7797040
 
Integrex-E-1060VIntegrex-E-1060V
2005 Mazak Integrex-E-1060V

31.4" x 31.4" Pallets, 73.82" x 14.73" x 52.95" Travels, 80 ATC, 10,000 RPM, CAT 50, Mazatrol 640M Pro CNC Control, Chip Auger, 50 HP/ 40 HP, Mazak Superflow Coolant System (1000 PSI), Die Mold Package, Tool Eye, Laser Measurement For Rotary Tool, Renishaw Work Measuring Probe

 
$359,900.00
Ref No: 7796954
 
ISG 390 V10-19ATISG 390 V10-19AT
2000 Toshiba ISG 390 V10-19AT

 40.1" x 40.1" Platen Dimensions, 28.7" x 28.7" Tie Bar Spacing, 49.2" Max Daylight, 11.8" Min Daylight,  37" Clamp Stroke, Injectvisor V10 Control, HKO, CP, RI

 
$24,500.00
Ref No: 7796612
Tonnage: 390.0
Shot Size: 20
 
ISG250NV10-10YISG250NV10-10Y
1999 Toshiba ISG250NV10-10Y

 24" x 22" Tie Bar Spacing, 34.2" x 32.2" Platen, 31.5" Clamp Stroke, 41.7" Max Daylight, 10.2" Min Mold Thickness, 5.1" Ejector Stroke, Injectvisor V10 Control, HKO, CP, RI

 
$13,500.00
Ref No: 7796783
Tonnage: 250.0
Shot Size: 13.1
 
ISG390V10-19BISG390V10-19B
1995 Toshiba ISG390V10-19B

 40.1" x 40.1" Platen Dimensions, 28.7" x 28.7" Tie Bar Spacing, 49.2" Max Daylight, 11.8" Min Daylight, 37" Clamp Stroke, Injectvisor V10 Control, HKO, CP

 
$11,900.00
Ref No: 7796683
Tonnage: 390.0
Shot Size: 41
 
ISGS610WV10-59BISGS610WV10-59B
2000 Toshiba ISGS610WV10-59B

38" x 38" Tie Bar Spacing, 55.1" x 55.1" Platen Size, 47.2" Clamp Stroke, 6.3" Ejector Stroke, 15.8"/63" Daylight Min/Max, Injectvisor V10 Control, HKO, CP, RI

$47,600.00
Ref No: 8068167
Tonnage: 610.0
Shot Size: 126
 
MV-50EMV-50E
2000 Mori Seiki MV-50E

 40" x 20" x 18" Travels, 20 ATC, 8,000 RPM, Cat 40 Taper, 220V/3Ph/60Hz Power Requirement, MSC-500 CNC Control

$39,500.00
Ref No: 7795808
 
NL-2000SY/500NL-2000SY/500
2007 Mori Seiki NL-2000SY/500

 8" Chuck, 2.5" Bar Capacity, 36.4" Swing, 14" Turning Diameter, 5000 RPM, Mori Seiki MSX-850III Control, 20" Distance Between Centers, 12 Station Turret, Live Tooling, Chip Conveyor, 8" Sub Spindle, Auto Tool Presetter, Parts Catcher

$129,500.00
Ref No: 8039429
 
NT3200 DCG/ 1000 SZNT3200 DCG/ 1000 SZ
2006 Mori Seiki NT3200 DCG/ 1000 SZ

2.6" Bar Capacity, 23.6" Swing, 23.6" Turning Diameter, 5,000 RPM, 49.4" Centers, 12 Turret, 80 ATC, MSX-711 Control, Live Tooling, Chip Conveyor, Sub Spindle, Auto Tool Presetter

 
$189,000.00
Ref No: 7795841
 
QT-250QT-250
1999 Mazak QT-250

8" Chuck, 2" Bar Capacity, 23.6"  Swing, 15.7" Turning Diameter, 5,000 RPM, 20" Distance Between Centers, 12 Turret, Mazatrol Fusion 640T CNC Control, Chip Auger, Tailstock, Auto Tool Presetter, Parts Catcher

 
$16,990.00
Ref No: 8039371
 
QTN 350-IIMYQTN 350-IIMY
2007 Mazak QTN 350-IIMY

15" Chuck, 26.5" Swing, 4000 RPM, Mazatrol Matrix Nexus Control, 12 Position Turret, Tool Eye, Prog. Steadyrest, Chip Conveyor

$150,000.00
Ref No: 8039158
 
SL-250-A-MCSL-250-A-MC
1997 Mori Seiki SL-250-A-MC

 10" Hydraulic Chuck, 26.8" Swing, 15.74" Center Distance, 2.9" Bar Capacity, 3500 RPM, 10 Turret, 20 HP, Fanuc 18T Control, Live Tooling, Tailstock, Spindle Tailstock, Chip Conveyor

$21,900.00
Ref No: 7794250
 
SL-25ESL-25E
2000 Mori Seiki SL-25E

 10" Chuck, 2.75" Bar Capacity, 20.5" Swing, 3,500 RPM, 20.9" Distance Between Centers, 10 Turret, MT #3 Tailstock, Yasnac CNC Control

$29,900.00
Ref No: 7795806
 
SL-303BMCSL-303BMC
2000 Mori Seiki SL-303BMC

3.5" Bar Capacity, 28.1" Swing, 19.7" Turning Diameter, 3,000 RPM, MSG 501 CNC Control, A2-8, Chip Conveyor, Tool Presetter, Built in Live Center Programmable Tailstock

$59,500.00
Ref No: 7798358
 
SL-45BSL-45B
1998 Mori Seiki SL-45B

15" Hydraulic Chuck, 18.1" Swing Over Cross Slide, 19.3" Turning Diameter, 1,500 RPM, Fanuc 16 Control, 60.1" Distance Between Centers, Chip Conveyor

$34,500.00
Ref No: 8068225
 
SL-45C/1000SL-45C/1000
1997 Mori Seiki SL-45C/1000

15" Chuck, 26.4" Swing, 19.3" Max Turning Diameter, 1,010 RPM, MSC-516 (Fanuc) Control, 45.1" Distance Between Centers, 12 Station, Tailstock, Chip Conveyor

$69,000.00
Ref No: 7798300
 
Space Gear U44Space Gear U44
2006 Mazak Space Gear U44

4' x 4' Table Size, 1500 Max Wattage, 50" x 50" x 16.5" Travels, Voltage 230/460/3/60, Fanuc L64 Control, Chiller Unit

 
$29,990.00
Ref No: 8039222
 
SR50D-C75SR50D-C75
2011 Sumitomo SR50D-C75

Mold Size 14.18" x 14.18", Table Dimensions 41.37", Ejector Stroke 2.36", Mold Opening Stroke 8.66", Mold Height 7.88" x 11.82", Sumitomo Control, Rotary Table

 
Call For Price
Ref No: 7796484
Tonnage: 50.0
Shot Size: 1.1
 
TH80E-9VE VERTICAL/ELECTRICTH80E-9VE VERTICAL/ELECTRIC
2005 Nissei TH80E-9VE VERTICAL/ELECTRIC

16.14" x 16.14" Tie Bar Spacing, 22.4" x 22.4" Die Plate Dimensions, 20.5" Max Daylight, NC9300 Control, RI, Single Station Table, Under Power

 
$39,500.00
Ref No: 7797159
Tonnage: 88.0
Shot Size: 2.3
 
TM 400 G2TM 400 G2
1996 Toyo TM 400 G2

 31.89" x 31.89" Tie Bar Spacing, 41.34" x 41.34" Platen, 6.30" Ejection Stroke, 57.08" Max Daylight, PLCS 6 Control, HKO, CP, RI

$17,500.00
Ref No: 7793648
Tonnage: 400.0
Shot Size: 40
 
TM-300HTM-300H
2005 Toyo TM-300H
28.74" x 28.74" Distance Between Tie Bars, 37" x 37" Platen Size, 9.84" /25.60" Min/Max Mold Height, 22.83" Clamping Stroke, Ejector Stroke 5.51",460 Volt, PLCS-11 Control, HKO, CP, (2) Machines Available
 
$52,900.00
Ref No: 7796905
Tonnage: 300.0
Shot Size: 32.8
 
TM-400HTM-400H
2005 Toyo TM-400H

 41.3" x 41.3" Platen Size, 31.9" x 31.9" Tie Bar Spacing, 27.5" Clamp Stroke, 11.8"/29.5" Min/Max Mold Height, PLCS-11 Control, HKO, CP, RI, (2) Machines Available

 
$76,500.00
Ref No: 7796909
Tonnage: 400.0
Shot Size: 55
 
TM-400HTM-400H
2006 Toyo TM-400H

 41.3" x 41.3" Platen Size, 31.9" x 31.9" Tie Bar Spacing, 27.5" Clamp Stroke, 11.8"/29.5" Min/Max Mold Height, PLCS-11 Control, HKO, CP, RI

 
$87,500.00
Ref No: 7796912
Tonnage: 400.0
Shot Size: 55
 
TM110HTM110H
1997 Toyo TM110H

 18.11" x 18.11" Tie Bar Spacing, 25.20" x 25.25" Platen, 14.17" Clamp Stroke, 5.91"/17.72" Min/Max Mold Height, 460 Power Requirement, PLCS 9 Control, HKO, CP

$16,999.00
Ref No: 7795727
Tonnage: 110.0
Shot Size: 6
 
TM110HTM110H
2001 Toyo TM110H

 18.11" x 18.11" Tie Bar Spacing, 25.20" x 25.25" Platen, 14.17" Clamp Stroke, 5.91"/17.72" Min/Max Mold Height, 460V Requirement, PLCS 9 Control, HKO, CP

$21,500.00
Ref No: 7795726
Tonnage: 110.0
Shot Size: 6
 
TUE-20TUE-20
2001 Toshiba TUE-20

 78.7" Table Diameter, 90.5" Max Swing, 59.05" Max Turning Height, 200 RPM, 60 HP, Fanuc 18 CNC Control, Chip Conveyor, Coolant System

Call For Price
Ref No: 7787606
 
VMC-15XTVMC-15XT
1997 Fadal VMC-15XT

30" x 16" x 20" Travels, 21 ATC, 7,500 RPM, Cat 40 Taper, 15 HP, 230/3/60 Power Requirement, CNC 88HS Control, 4th Axis, Coolant, Rigid Tap

 
$13,995.00
Ref No: 7801468